All Categories
EN
Antenna feeder surge protector

Home > Products > Network /signal surge protect > Antenna feeder surge protector

1

AF surge protector WPX-AFA-10F4-60C


Product introduction:High and stable lightning protection effect, long serving life;Hybrid circuit design, every line can pass feed supply

Product application:Indoor TV signal protection in public places;Family set top box feeder line signal protection

Phone number:+86-731-88650578

Contact E-mail:[email protected]

Specifications
Model NumberWPX-AFA-10F4-60C
Art No.510 105
Operating Temperature Range-40℃~+80℃
Relative Humidity≤95%(25℃)
Atmospheric Pressure86~106 kPa
SPD accordingGB18802.21-2004
Nominal Working Voltage(Un)60V
Maximum Working Voltage IRL10A
Working Frequency0-862MHZ
Connection TypeF(British)
C2 Total nominal discharge current (8/20μs)(In)40kA
C2 Nominal discharge current (8/20μs)per line (In)10kA
Line-PE Voltage protection level InC2(Up)≤600A
Line-PE Voltage protection level 1kV/μs C3(UP)≤400A
Response Time (tA)≤15ns
Port quantityin-4;out-4
Input wiring methodF connector( British )-Jack
Output wiring methodF connector( British )-Jack
Enclosure materialAluminum alloy
Installation methodWall mounted
Installation placeIndoor
Degree of protection(IP code)IP20
Size155.5mm×108.5mm×32mm
Diagram of dimensions

1-16011Z92T2M5

Description

6

AFA-10F4-60 series antenna feeder signal surge protective device is used for protecting the antenna lines of cable TV stations, restrain the induction thunder electric wave from antenna lines,to protect the feeder system equipment of base station from lightning strikes.Mainly installed on the cable TV boxes, apply to protecting the signal of the trunk amplifier, photoreceiver and other cable network equipment, with the feature of good lightning protection, long service life, easy installation etc.

INQUIRY

Worktime:8:00 ~ 17:00

ENQUIRE NOW

close
Enquire Now