All Categories
EN
Antenna feeder surge protector

Home > Products > Network /signal surge protect > Antenna feeder surge protector

1

AF surge protector WPX-AFA-25T


Product introduction:IP65 Brass housing surge protector with TNC-type connector

Product application:Suitable for Mobile RF station or satellite receiver use for surge protection.

Phone number:+86-731-88650578

Contact E-mail:[email protected]

Specifications
Model NumberWPX-AFA-25T
Art No.651 101
SPD categoryType 1+Type 2
DC Max Continuous Operating Voltage( Uc)18V
AC Max Continuous Operating Voltage( Uc)18V
Max working current (IL)3A
D1 Impulse discharge current (10/350μs)(Iimp)1.5kA
D1 Nominal discharge current (In)10kA
Voltage protection level D1(UP)≤400V
Voltage protection level D1(UP)≤700V
Voltage protection level wire-wire 1kV/us C3(UP)≤600V
The working frequency0-2.5GHz
Applicable power100W
Insertion Loss(0-2.5GHz)≤0.2dB
Insertion Loss(2.5-4GHz)------
Insertion Loss(4-5.8GHz)------
VSWR≤1.2
Characteristic impedance50Ω
Response Time(tA)≤15ns
Relative Humidity≤95%(25℃)
Working temperature range(TU)-40℃---+80℃
Atmospheric Pressure86kPa...106kPa
Model of port (input/output)TNC-J/K
Housing materialBrass
Installation placeIndoor/Outdoor
Degree of protection(IP code)IP65
Test CriteriaIEC 61643-21/GB/T 18802.21
Diagram of dimensions


1-160222160456206

Description

8

AF SPD Series (TNC): AF SPD with TNC type connection is applied to the feeder ports of wireless

receiving and transmitting equipment (such as navigation systems, gateway antenna etc) lightning protection.

Adopt coaxial gas pipes technology, surge protector with the features of wide frequency range,low insertion

loss, low reflection loss and good lightning protection effect.


INQUIRY

Worktime:8:00 ~ 17:00

ENQUIRE NOW

close
Enquire Now