All Categories
EN
POE surge protector

Home > Products > Network /signal surge protect > POE surge protector

WPX-BMSA-16B-5

Video Signal Surge Protector Series 19


Specifications
Model NumberWPX-BMSA-20B-5WPX-BMSB-20B-5WPX-BMSA-20B-12WPX-BMSB-20B-12WPX-BMSA-20B-24WPX-BMSB-20B-24
Art No.660 101660 201660 102660 202660 103660 203
SPD categoryType 2Type 2Type 2Type 2Type 2Type 2
Rated Working Voltage( Uo)5V5V12V12V24V24V
DC Max Continuous Operating Voltage( Uc)6V6V15V15V30V30V
AC Max Continuous Operating Voltage( Uc)4.8V4.8V11.5V11.5V23.5V23.5V
Max working current (IL)0.5A0.5A0.5A0.5A0.5A0.5A
Nominal discharge current (In)5kA5kA5kA5kA5kA5kA
Nominal discharge current (In) 5kA5kA5kA


Voltage protection level C2(UP)≤30V≤30V≤40V≤40V≤75V≤75V
Voltage protection level C2(UP) (SE-PE)≤600V≤600V≤600V


Voltage protection level wire-wire 1kV/us C3(UP)≤20V≤20V≤35V≤35V≤55V≤55V
Voltage protection level wire-wire 1kV/us C3(UP)≤600V≤600V≤600V≤600V

Response Time(tA)≤1ns≤1ns≤1ns≤1ns≤1ns≤1ns
Insertion Loss(10MHz)≤0.3dB≤0.3dB≤0.3dB≤0.3dB≤0.3dB≤0.3dB
Insertion Loss(30MHz)≤0.8dB≤0.8dB≤0.8dB≤0.8dB≤0.8dB≤0.8dB
Impedance in series
transmission rate30Mbps30Mbps30Mbps30Mbps30Mbps30Mbps
Relative Humidity≤95%(25℃)

-40℃---+80℃

86kPa...106kPa

in/20×BNC/75Ω;out/20×BNC/75Ω

Cold rolled steel plate/SPCC/UL V-0

Indoor/Outdoor

IP20

19-inch cabinet 1U/19-inch rack

Working temperature range(TU)
Atmospheric Pressure
Wiring methods
Housing material
Installation place
Degree of protection(IP code)
Test Criteria
Diagram of dimensions


1667884266854420

Description

WPX-BMSA-16B-5

Video Signal SPD is connected in series to the input end of protected equipment. Once the transmission line is stricken by lightning strokes and surges, the SPD will shunt the lightning and surge current to the ground, clamping it to an acceptable range of equipment, which protects the equipment (such as the camera, monitor, and mobile telecom).

INQUIRY

Worktime:8:00 ~ 17:00

ENQUIRE NOW

close
Enquire Now