EN 
service@hnwpx.com
Network SPD WPX-BHSA-4R4-5
Product introduction:100Mbps transfer rate; 4 Channels protection; RJ45 socket; Aluminium housing;
Product application:4 Channels protection; RJ45 socket; Aluminium housing;
Phone number:+86-731-88650578
Contact E-mail:service@hnwpx.com
Specifications
| Model Number | WPX-BHSA-4R4-5 |
| Art No. | |
| SPD according IEC 61643-1 | Class Ⅱ |
| SPD according EN 61643-11 | Type 2 |
| DC Max. Continuous Operating Voltage Uc | 6V |
| AC Max. Continuous Operating Voltage Uc | 4.8V |
| Max working current (IL) | 0.5A |
| C2 Total nominal discharge current (8/20μs)(Itotal) | 5kA |
| C2 nominal discharge current (8/20μs)per wire（In） | 2.5kA |
| Total nominal discharge current C2-PE(Itotal) | 10kA |
| Nominal discharge current per wire C2-PE(In) | 2.5kV |
| Voltage protection level wire-wire C2(UP) | ≤50V |
| Voltage protection level wire-PE C2(UP) | ≤70V |
| Voltage protection level wire-wire 1kV/usC3(UP) | ≤25V |
| Voltage protection level wire-PE 1kV/usC3(UP) | ≤25V |
| Response Time(tA) | ≤1ns |
| transmission rate | 100Mbps |
| Insertion Loss(100MHz) | ≤1.0dB |
| Impedance in series | ≤0.5Ω |
| Protected pin | 1/2;3/6; |
| Relative Humidity | ≤95%（25℃） |
| Working temperature range(TU) | -40℃---+80℃ |
| Atmospheric Pressure | 86kPa...106kPa |
| Wiring methods | RJ45 |
| Port numbers | in-8×RJ45；out-8×RJ45 |
| Housing material | Aluminum |
| Installation place | Indoor |
| Degree of protection（IP code） | IP20 |
| Installation methods | Wall mounting |
Diagram of dimensions
Description
Signal surge protector BHSA-4R4-5 type products are mainly used for TCPIP communication network protect signal lines of electrical equipment against the influence of lightning electromagnetic pulse, induced over-voltage, operating over voltage. Signal surge protectors are widely used in communications, security monitoring, and industrial control fields. Under the premise that does not affect the device’s normal communication, it has a good lightning protection effect.
