EN 
service@hnwpx.com
Power strip WPX-PDU166-1.8P
Product introduction: 10kA PDU socket type surge protector
Product application:Suitable for 19-inch rack installation for power distribution or Network data center.
Phone number:+86-731-88650578
Contact E-mail:service@hnwpx.com
Specifications
| Model Number | WPX-PDU106-1.8P | WPX-PDU166-1.8P |
| SPD according IEC61643-11/GB 18802.1/EN 61643-11 | Class II/Type 2 | Class II/Type 2 |
| Applicable power supply system | Single-phase | Single-phase |
| Modes of protection | L-N,L-PE,N-PE | L-N,L-PE,N-PE |
| Rated Working Voltage Uo | 250V~ | 250V~ |
| Maximum load power P | 2500W | 4000W |
| Max Continuous Operating Current IL（in-out） | 10A | 16A |
| Max Continuous Operating Voltage Uc（L-N/N-PE） | 275V~ | 275V~ |
| Total Discharge Current Itotal(8/20μs) | 10kA | 10kA |
| Nominal Discharge Current In(8/20μs) (L-N/N-PE) | 5kA | 5kA |
| Μax Discharge Current In(8/20μs) (L-N/N-PE) | 10kA | 10kA |
| 1kA,Voltage Protection Level Up(L-N/N-PE) | ≤0.6kV | ≤0.6kV |
| 3kA,Voltage Protection Level Up(L-N/N-PE) | ≤0.8kV | ≤0.8kV |
| In Voltage Protection Level Up(L-N/N-PE) | ≤1.0kV | ≤1.0kV |
| Response Time tA(L-N) | ≤25ns | ≤25ns |
| Max. mains-side Overcurrent Protection(L) | 16A( gL/gG)/(No need) | 16A( gL/gG)/(No need) |
| Cross sectional area for wiring terminal connected to conductor | 3×1.0mm2 | 3×1.5mm2 |
| Operating Temperature Range | -40℃...+80℃ | -40℃...+80℃ |
| Relative Humidity | ≤95%（25℃） | ≤95%（25℃） |
| Atmospheric Pressure | 86kPa...106kPa | 86kPa...106kPa |
| Working Frequency | 42Hz...68Hz | 42Hz...68Hz |
| Enclosure material | Aluminum/UL V-0 | Aluminum/UL V-0 |
| Mounting | 19-inch rack | 19-inch rack |
| Degree of protection（IP code） | IP20 | IP20 |
| Range of Application | machine room | machine room |
| Plug Type | GB 2099/10A | GB 2099/10A |
| Jack Type | GB 2099/16A | GB 2099/16A |
Diagram of dimensions
Description
Simple structure and easy installation in the 19 inch rack, compact design;
Overheat protection;
Operating indicationand thermal separation;
IP20, UL94 V0Y-safe design, causing damage to the surge protectorto prevent the occurrence of the circuit when an insulation failure
