EN 
service@hnwpx.com
Equipotential bonder WPX-EA100-800
Product introduction:Large flow capacity, 10/350us 100KA, Waterproofing grade IP68,Ex (IA) II CT4.
Product application:Special Design, special purpose, Small size, easy installation.
Phone number:+86-731-88650578
Contact E-mail:service@hnwpx.com
Specifications
| Model Number | WPX-EA100-800 |
| Art No. | 410 104 |
| SPD according IEC61643-11/GB 18802.1/EN 61643-11 | Class I/Type 1 |
| AC Max Continuous Operating Voltage( Uc) | 255V |
| Conductive Voltage(Ua) | 640V~960V |
| Impulse discharge current(10/350ps)(Iimp) | 100kA |
| Nominaldischarge current (In) | 20kA |
| Max Discharge Current In(8/20us) | 20kA |
| Voltage protection level (Ur) | s2.5V |
| insulation resistance | 210MQ |
| Response Time(ta) | s100ns |
| Working temperature range(TU) | -40°C---+80C |
| Atmospheric Pressure | 53kPa...106kPa |
| Mode ofConnectian | PV-MC4 |
| Housingmaterial | 铝合金/Aluminum/ULV-0 |
| Installation place | Indoor, outdoor |
| Atmospheric Pressure | 76kPa...106kPa |
| Degree ofprotection (IPcode) | IP68 |
Diagram of dimensions
Description
Install:
1.1 equipotential connectors with connecting terminals, can be directly installed by bolts on the protected equipment.
1.2 the equipotential connector can flexibly adjust the bending degree of the connecting cable to suit various environments.
1.3 an equipotential connector is required to pass through the connector to be installed. It can be used in insulated flange contacts, cathodic protection of pipe coupling parts and explosion-proof requirements of the environment.
2 use and maintain
2.1 before use, measure the insulation resistance of the two terminals of the equipotential connector with the triple meter Q X10k, the value should be infinite.
2.2 the equipotential connector can be put into use immediately after the selected position, so the surge protector can not guarantee the equipment effectively
